DIY Small plumbing jobs

There’s no denying that plumbing issues can appear out of nowhere and, many times, they can be very hard to deal with. But you can easily deal with these problems as long as you have the right approach. It all comes down to addressing the small plumbing jobs on your own. With that in mind, here you have a few small plumbing jobs tips and tricks that you can start using right now!

Reheat a solder when you can’t cut that pipe

The best way to disconnect the soldered pipe is just to cut it. But in case you can’t cut the pipe, a very good idea is to heat it. The solder will melt as you heat it, and this will offer you the help and efficiency you need. The trick is to have a wet rag that you will use to wipe the solder away before that hardens.

Replace the metal drain lines with plastic

Metal drain lines were good a decade or two ago, but nowadays they are obsolete. The DIY small plumbing jobs around your home should rely on replacing the metal drain lines with plastic ones. Plastic doesn’t have to deal with corrosion and installing it is easy. You just stop the main valve, remove the metal drain lines and replace them with plastic lines that have the same size.

Fixing a clog

Clogs are those annoying small plumbing jobs that you can try to solve on your own. And while it can be a good idea to run a drain snake into the clog, you can always use a flexible shaft pick up tool. A vacuum can also come in handy. You can use the drain snake as a last minute resort, if necessary!

Sealing pipe threads

If you want to avoid any leaks, one of the best small plumbing jobs tips and tricks is to use thread tape. This type of tape works amazingly well, and it allows you to prevent any potential problems in the future. You don’t have to opt for the expensive stuff; you just have to get whatever type of thread tape you can. You can wrap it around the pipe three times; it will be more than ok!

Cut the stubborn parts

There will be situations when you need to do all in your power to cut those two pipes that are locked together and which stopped the entire drain system from working. If you want to cut the stubborn parts that were locked by mineral deposits or corrosion, you should use rotary tools or a hacksaw blade; this will be more than efficient in the end!

In the end, these are some of the best DIY small plumbing jobs that you can attempt on your own. Not only are they easy to do, but you don’t have to worry about paying someone to handle these tasks for you. Follow our small plumbing jobs tips and tricks; you will have no problem dealing with these small plumbing jobs on your own!